Call or text Alex(214) 335-0285Get a quote
Alex working on the door glass of a black car at New Shade Tint

Window tint removal in Lavon, TX

Bubbled, purple or peeling film comes off and the glass is cleaned back to bare. Removal is priced on its own, from $25.

5.0264 Google reviews

When film is done

How to tell old tint has failed

Failed tint is easy to spot from across a parking lot. These are the usual signs.

  • Purple. The dye in the film has broken down in the sun.
  • Bubbles. The adhesive has let go of the glass, and the pockets keep spreading.
  • Peeling. Corners and top edges lift, then catch every time the window rolls down.
  • Too dark. Film on the front doors that lets in 25% of light or less does not meet the Texas rule.

New film cannot go over it

Fresh tint needs clean, bare glass. Put it over old film and the bubbles, the purple cast and the weak glue are all still under there.

So the old layer comes off first. Then you choose: leave the glass clear, or have Alex install one of the XPEL PRIME films. If the last tint went purple, a ceramic film is worth a look, since it also stops a lot more heat. The cure time guide covers what new film looks like in its first couple of weeks.

The rear glass

Defroster lines need care

The thin lines across the back window are bonded to the inside of the glass. That is the same surface the film is glued to.

Pull old film off cold, or go after the leftover glue with a razor blade, and a defroster line can come away with it. A broken line stops heating. This is the reason rear windows take the longest, and the reason a quick driveway removal so often ends with half a working defroster.

Alex softens the film and the adhesive before anything is peeled, and he takes the back glass slowly.

What tint removal costs

How long a removal takes depends on the film that is on the car, and nobody knows that until they look.

  • How many windows have film
  • How far the film and glue have broken down
  • Whether the rear window is part of the job

Removal starts at a $25 minimum and can run to $199 or more. On some back windows it can cost more than replacing the glass, and Alex will tell you if yours is one of them. Text him a photo of the glass or call, and he will quote it.

A hand holding a crumpled sheet of old window tint film that has been peeled off the glass

The process

How removal works

  1. Look at the film. Alex checks each window and tells you what he sees, including any defroster lines that already look damaged.
  2. Soften and peel. The old film is warmed so the adhesive releases, then peeled away from the glass.
  3. Clean off the glue. Whatever adhesive stays behind is removed until the glass is bare and clear.
  4. Bare glass or new film. You can stop there. If you want new tint, you pick the film and shade and it goes on clean glass.

Also at the shop

Related services

Windshield tint

Visor strips and full windshield heat film, and what Texas allows.

★★★★★

“I messaged Alex today expecting a quick quote and to schedule something this week or even later. He got back to me immediately, was far more competitive than other quotes I’ve gotten, and even got me in same day. My car was in and out within a matter of hours and it looks incredible!”

Bryan BoothGoogle
★★★★★

“I drove past at least 3 tint shops to get to New Shade. I really appreciated Alex’s responsiveness, professionalism, and knowledge. He helped me understand the pros and cons of the different options available for my vehicle. The installation and final product is immaculate.”

A YoungGoogle
★★★★★

“Alex is the best at what he does. My windows are perfect. Do to the ceramic tint I now run my A/C blower speed on 2 on 100+ degree days.”

Josh TaylorGoogle

FAQ

Tint removal questions

How much does tint removal cost?

There is a $25 minimum, and a removal can run to $199 or more. The price depends on how many windows have film, how badly it has broken down, and the time and labor it takes. Rear windows cost the most. On some vehicles, removing film from the back glass can cost more than replacing the glass. Text Alex a photo and he will give you a number.

Can new tint go over the old film?

No. Old film comes off before new film goes on. Tinting over bubbles or failed adhesive just puts new film on a bad surface.

Will removing tint damage my rear defroster?

It can if the film is pulled off cold or the glue is scraped with a blade, because the defroster lines sit on the inside of the glass under the film. Alex takes the rear window slowly for that reason. If any lines already do not work, tell him before he starts.

Why did my tint turn purple?

The dye in cheap film breaks down in the sun and the color shifts toward purple. Once that happens the film does not recover.

What causes tint to bubble?

The adhesive has let go of the glass. Heat and age do it, and so does a poor install. Bubbles do not flatten back out.

My tint is too dark for Texas. Can you take it off?

Yes. Texas requires front side windows to let in 25% or more of the light. Alex can remove film that is darker than that and, if you want, put on a legal shade.

Do I have to get new tint after removal?

No. The glass can stay bare. If you do want new film, Alex installs XPEL PRIME CS, XR and XR PLUS.

Contact

Get the old film off

Call or text Alex with the year and model and a photo of the glass. He owns the shop and does the work, so if he is mid-install, leave a message and he will get back to you.

The shop

730 Private Road 5939, Suite 17
Lavon, TX 75166

Mon-Fri: 8 AM - 5 PM
Sat: 9 AM - 1 PM
Sun: Closed

Work is by appointment, so check with Alex before you drive out.