Tint percentages explained
A tint percentage is the share of visible light the window lets through, called VLT. Lower numbers are darker: 70% is nearly clear, 35% is a medium tint, 20% is dark and 5% is limo. In Texas the front side windows must pass 25% or more with the film and glass measured together, and the back windows can be any shade.
What the number means
VLT stands for visible light transmission. A film rated 35% lets 35% of visible light through and stops the other 65%. The scale runs backwards from what people expect, so 5% is the dark one.
The number on the box describes the film alone. Door glass is not perfectly clear from the factory, so the finished window ends up a little darker than the film's rating. If the bare glass passes 80% and the film is 35%, the two together pass 28%. Texas measures that combined figure, which matters on the front doors.
Try the shades
Tap a percentage. The car's glass changes, and the list under it shows where that shade stands in Texas.
How dark is 35%?
Medium Clearly tinted from outside. In daylight you can still make out the people inside.
- Front doors
- Back doors No limit in Texas
- Rear glass No limit with a mirror on each side
The picture is an illustration. Real glass looks lighter or darker with the sun, the interior color and the film. Alex has samples to hold against your own window.
The common shades, side by side
| Shade | From outside | Seeing out | In Texas |
|---|---|---|---|
| 70% | Nearly clear. Most people will not notice the glass is tinted. | No real change, day or night. | Legal on the front doors. On a windshield below the AS-1 line, Texas only names clear, untinted UV film as allowed. |
| 50% | A light smoke. Takes the edge off glare. | Easy at night. | Legal on the front doors, back doors and rear glass. |
| 35% | Clearly tinted. Faces inside are still visible in daylight. | Comfortable at night for most drivers. | Legal on the front doors as long as film and glass together still pass 25% or more. |
| 20% | Dark, in the range of factory privacy glass. | Fine by day. Noticeably dimmer at night. | Back doors and rear glass. Under the limit on the front doors. |
| 5% | Limo. Reads as black from outside in daylight. | Hard at night, especially backing up. | Back doors and rear glass. Under the limit on the front doors. |
Texas limits are from Transportation Code 547.613 and the DPS window tinting standards. The full breakdown is in the Texas tint law guide.
70%
The lightest film most shops carry. It leaves the glass looking stock and still blocks 99% of UV. In a ceramic film it also stops a real share of the heat, which is why people ask about it for the windshield. Read the windshield section of the law guide before doing that: Texas covers tinted film only in the strip at the top, and DPS names clear, untinted UV film as the thing allowed below it.
50%
A light tint that cuts glare without changing how the car looks much. It suits drivers who want heat rejection from a ceramic film and no attention.
35%
A common choice for front doors in a state with a 25% rule. It looks tinted, it is easy to live with at night, and it leaves room for the factory glass to pull the reading down without crossing the line.
20%
Dark enough that people outside see shapes and not much else. It sits in the range of the privacy glass on the back half of many trucks and SUVs. In Texas it belongs behind the driver.
5%
Limo tint. Legal on the back doors and rear glass in Texas and nowhere near legal on the front doors without a medical statement. It gives the most privacy and asks the most of the driver after dark.
Night driving, honestly
Every shade costs some night vision. At 50% and 35% most drivers stop noticing within a day. At 20% the side mirrors and the view over the shoulder are dimmer, and at 5% reversing down a dark driveway means rolling the window down or trusting the camera. Rain makes all of it worse.
The front doors are the windows a driver looks through to check mirrors and cross traffic, and they are the ones Texas limits. Anyone who drives unlit county roads at night should think about that before going as dark as the law allows on the back glass too.
Ask Alex what he would put on the vehicle and he will say. Maria Montanez wrote in her Google review that Alex "helped me pick the percent tint I put on. (I’m glad I went with the his recommendation and did not go lighter.)"
Factory privacy glass vs film
The dark rear glass on most trucks and SUVs is not film. The color is in the glass itself, put there when the glass was made. It gives privacy, and it is legal as delivered because the Texas statute exempts factory-tinted windows that meet federal standards.
Privacy glass and window film are built for different jobs. A ceramic film is made to stop infrared heat and 99% of UV, and that is why some owners add a light ceramic film over factory privacy glass. The glass does not get much darker and the back seat runs cooler. The other common job on these vehicles is the front two windows, which come nearly clear and can be matched to the rear.
Picking a shade
Choose the film first and the shade second. Darkness controls privacy and glare. The film type controls heat, and a light ceramic blocks more of it than a dark dyed film. Ceramic vs carbon vs dyed covers that choice, and the cost guide covers what each film does to the price.
